General
Description
Templers Telux is a general purpose Soldering flux used for capillary
joints on copper pipework, brass and mild steel and other metals.
It is supplied in 50gram, 250gram, and 450gram containers. Telux
is UK WRAS listed
for use with both hot & cold water including potable water.
It is also suitable for use with gas pipework
Normal
Usage
Remove any scale and oxide with emery cloth or wire wool. Wipe joint
areas clean. Smear a thin film of Telux to both surfaces and assemble.
Apply heat with soldering iron or blowtorch adding solder as required.
Allow to cool and set, then wipe clean whilst still warm.
Handling Instructions
In normal use it is advised that a suitable barrier cream be used
to protect sensitive skin.
Avoid inhaling fumes where possible - our tests have shown the fumes
to be relatively harmless.
Do not ingest - avoid skin and eye contact.
|